Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Las Vegas?
Our Gate Installation services in Las Vegas typically cost between $1,800 and $9,000 for most residential properties in 2026, with the majority of homeowners paying around $3,500 to $5,500 for a complete single-swing gate with an automated opener. Manual gates run lower, usually $800 to $3,000 depending on material and size. These numbers reflect what we quote across Summerlin, Henderson, Centennial Hills, and the older neighborhoods around downtown, where driveway widths and existing pillars change the job scope considerably.
If you want a direct answer before we unpack the details: a standard wrought-iron single-swing Driveway Gate with a LiftMaster or FAAC operator in Las Vegas lands between $4,000 and $6,500 installed. That includes the gate fabrication, the actuator (the motorized arm that physically pushes the gate open), safety sensors, and the control panel mounted at the house. We put that price in writing before the first bolt comes off the truck, because that is how the Kingswell Guarantee works.
Key Takeaways
- Plan on $1,800 to $9,000 for most Las Vegas residential gate installations, with $3,500 to $5,500 as the realistic mid-range.
- Manual gates cost $800 to $3,000; adding automation typically adds $1,200 to $2,800 depending on operator brand and gate weight.
- Wrought iron is the most common material in Las Vegas and runs $55 to $110 per linear foot fabricated and installed.
- Desert climate plays a real role: powder-coat or galvanized finishes are worth the added cost to prevent rust from irrigation overspray and monsoon-season dust.
- Every Portcullis Gate Repair install includes a written price upfront and the 365-Day Done Right Promise on the automation work.
Gate Installation Cost Breakdown (2026)
Here is the cost table we have been using on Las Vegas quotes this year. These ranges reflect the labor market in Southern Nevada, current steel pricing from local suppliers, and the brand-specific operator costs for the nine systems we service.
| Item | Low End | High End | Notes |
|---|---|---|---|
| Manual single-swing gate, steel tube frame | $800 | $2,200 | Bare steel, no operator, 8-12 foot driveway |
| Manual wrought-iron single-swing gate | $1,700 | $3,400 | Decorative scrollwork, standard 10-14 foot opening |
| Automated single-swing gate, complete | $3,800 | $6,500 | Gate, actuator, sensors, keypad, control box |
| Automated double-swing gate, complete | $5,500 | $9,000+ | Two leafs, two actuators or one master-slave system |
| Slide gate (rolling), complete with automation | $4,500 | $8,500 | Needs track or cantilever system, more steel |
| Gate operator only, retrofit on existing gate | $1,400 | $2,800 | LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule |
| Pedestrian gate with latch and hinges | $500 | $1,300 | Often done alongside a driveway gate |
| Permit and HOA documentation assistance | $100 | $450 | Some HOAs in Summerlin and Green Valley require submittals |
What pushes a quote toward the high end in Las Vegas? Double-swing gates need twice the steel and either two actuators or a master-slave configuration, which adds genuine labor. Slide gates cost more because the track or cantilever hardware is heavy and the concrete pad for the track has to be dead level across a 15 to 20 foot run. And if your property sits in an HOA like those in Summerlin North, Green Valley Ranch, or Mountain’s Edge, expect some back-and-forth on style and finish before the permit is even pulled.
On the lower end, a simple manual gate on an existing steel post with a basic latch and drop rod will stay under $1,500 in most Las Vegas neighborhoods. That is the honest math: the automation is where the real cost sits, because the operator, the sensors, the wiring run to the house, and the programming add $1,200 to $2,800 by themselves.
What Affects Gate Installation Pricing in Las Vegas
- Gate material and finish. Wrought iron fabricated by a local steel shop runs $55 to $110 per linear foot. Powder coating adds $300 to $700 per gate but is near-mandatory here; irrigation water is hard, and overspray on raw steel shows rust within two summers.
- Swing versus slide. A single-swing gate is the most economical automated option. Slide gates require more steel, a track or cantilever kit, and a level concrete run, which is why they start around $4,500 installed.
- Operator brand and duty cycle. A residential LiftMaster LA400 costs less than a Viking or DoorKing commercial unit. We quote based on gate weight and cycles per day. In neighborhoods like The Lakes or Peccole Ranch where gates get opened 20 times daily, we spec a heavier-duty unit.
- Existing posts versus new posts. If the original masonry or steel posts are plumb and planted deep enough, we reuse them and save you $600 to $1,500. If they are leaning or set in loose caliche, we dig new footings. Las Vegas soil varies block to block; some areas are hard caliche, others are sandy fill.
- Safety sensor and keypad requirements. Clark County and most HOAs require photo-eye sensors and a keypad or intercom at minimum. Adding a phone-based entry system or a vehicle exit loop adds $400 to $1,200.
- Permits and HOA approvals. The City of Las Vegas, Henderson, and unincorporated Clark County each have slightly different setback and height rules. Some HOAs add their own architectural review. We handle the paperwork, but the time and fees are a real line item.
Operator Brand Cost Differences
One question we get weekly is whether the operator brand actually matters on price. It does, and not always in the way people expect. Here is the plain breakdown for Las Vegas installs:
- LiftMaster and Ghost Controls: Residential-friendly pricing, typically $350 to $650 for the operator itself. Good for single-swing gates up to 16 feet and 850 pounds.
- FAAC and BFT: Italian-made, heavier-duty residential and light commercial. Operators run $600 to $1,100. Common on double-swing gates in Summerlin and Anthem.
- Linear and Mighty Mule: Budget-to-mid residential. Mighty Mule kits start around $300. Linear runs $450 to $800. Fine for lighter gates, but we are honest about duty cycle limits.
- Viking, DoorKing, and Elite: Commercial-grade. These start at $900 and go to $2,500 for the operator alone. We install these on estate gates and HOA entry points, not usually on a standard suburban driveway.
The actuator, the motorized arm that physically pushes the gate open, is only part of the system. The control board, the safety sensors, and the wiring are where install labor varies. A retrofit on an existing gate with a working control box is usually a $1,400 to $2,200 job including labor. A full automation from scratch is $2,500 to $4,000 above the gate cost.
What the Kingswell Guarantee Covers on a New Install
Every gate we install in Las Vegas carries the same written standard. The Kingswell Guarantee is four commitments, stamped on the invoice: a written price before any work starts, a real arrival window, a clean job site when we leave, and a written guarantee on the installation.
For automation work, that guarantee runs 365 days under the 365-Day Done Right Promise. If the operator, actuator, sensors, or wiring fail inside that year, we come back and correct it at no charge. That includes the second visit. Nothing hidden, nothing prorated.
Dean Prescott, who leads Portcullis Gate Repair Las Vegas, has held the Kingswell standard since 2008. It is not a franchise slogan. It is the same four commitments every independently owned Kingswell location is bound to, and it is written on every invoice we hand over.
How to Save on Gate Installation
There are honest ways to lower the number on a Las Vegas gate quote that do not involve cutting corners on safety or automation quality:
- Reuse sound existing posts. If your masonry pillars or steel posts are straight and deep, we will use them. That removes $600 to $1,500 in demo and new footing work.
- Choose a single-swing gate over a slide gate. Unless your driveway slopes steeply toward the street or has no room for a swing arc, a single-swing gate is the most economical automated option.
- Size the operator to the actual duty cycle. A homeowner who opens the gate four times a day does not need a $2,000 Viking operator. We will spec the right unit and explain why in writing.
- Bundle a pedestrian gate. If you are installing a driveway gate, adding a matching walk-through gate at the same time costs less than doing it as a separate job later, because the crew and materials are already on site.
- Get the estimate in writing and compare honestly. We give you a written price before work starts, with no after-the-fact surprises. When you compare quotes, ask what is included: sensors, keypad, wiring, programming, and the written guarantee. Not all Las Vegas gate companies itemize those.
If you want a specific number for your driveway, call Portcullis Gate Repair Las Vegas at (725) 777-5391. The estimate is free. A live person answers, any hour, and Dean or one of our uniformed technicians will come out, measure, and hand you a written price before anything is ordered.
Common Gate Installation Projects in Las Vegas
The houses in Las Vegas are not all the same, and neither are the gates. Here is what we see in the neighborhoods where we work most often:
Standard Single-Swing Driveway Gate with Automation
This is the most common install in Centennial Hills, Silverado Ranch, and the subdivisions around Aliante. An 11 or 12 foot single-swing gate in powder-coated steel with a LiftMaster or FAAC actuator, safety photo-eyes, a keypad, and a push-button remote. Installed price: $3,800 to $6,500. Most jobs finish in one day, including programming the remotes and showing you how to use the manual release in a power outage.
Double-Swing Estate Gate
Common in The Ridges, MacDonald Highlands, and the larger properties along the western edge of the valley. Two gate leafs, often 8 feet tall with decorative finials, running a master-slave FAAC or BFT system. These start at $5,500 and run to $9,000 or more depending on steel thickness, finish, and whether we need to trench wiring under a paver driveway.
Retrofit: Adding Automation to an Existing Gate
Plenty of Las Vegas homes have a manual gate the builder installed, and the owner wants automation later. If the gate leaf is sound and the posts are good, we mount the actuator, run the low-voltage wiring, install the safety sensors, and program the controls for $1,400 to $2,800. This is the job where brand choice matters most, and we service all nine major operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Slide Gate for a Narrow or Sloped Driveway
Some Las Vegas driveways, particularly in older neighborhoods like Paradise Palms or properties along the base of Sunrise Mountain, do not have room for a swing arc. A slide gate rides on a track or cantilever system and costs $4,500 to $8,500 installed. The track has to sit on a level concrete pad, and the gate needs more steel because it is cantilevered. It is a bigger job, and we quote it with the concrete work itemized.
Las Vegas-Specific Considerations
Our climate does two things to gates. The heat and UV punish powder-coat finishes that are not UV-stabilized, and the hard water from irrigation systems causes rust at the base of raw steel gates faster than most people expect. We have seen unwrapped steel gates in Summerlin start showing rust blooms at the bottom rail inside eighteen months because a sprinkler head was misting the gate every morning.
The soil matters too. Much of the Las Vegas valley sits on caliche, a hardpan of calcium carbonate that can be anywhere from a few inches to several feet thick. Digging new post footings in caliche takes longer and sometimes requires a jackhammer attachment. In other spots, particularly older fill areas near the Las Vegas Wash, the soil is softer and footings need to be over-excavated and recompacted. We inspect the soil when we quote, because the footing depth and cure time change the labor number.
Wind is another factor people forget. Spring winds gusting through the valley put lateral force on tall gates. A 6-foot wrought-iron double gate catches a lot of wind, and the hinge posts need to be sized for it. We oversize posts on taller gates in exposed areas, especially on the west and northwest sides of the valley.
Permits and HOA Requirements
Most Las Vegas gate installations require a building permit if there is a new footing or if the gate exceeds certain heights. The City of Las Vegas, the City of Henderson, and Clark County each have their own permitting process, and the fees range from roughly $75 to $350 depending on the scope. Some HOAs add an architectural review on top of the permit.
We handle the permit application and HOA submittal for you, and we itemize those costs separately so you can see exactly what the government and the HOA are charging versus what the gate itself costs. In Summerlin and Green Valley, the HOA approval can take two to four weeks. That timeline is not in our control, but we build it into the schedule so you are not surprised.
DIY Gate Installation in Las Vegas: What You Should Know
We get calls from homeowners who bought a gate kit online and realized halfway through that the concrete pour, the post setting, or the operator wiring is more than they want to take on. Manual gate installation is doable for someone with steel fabrication experience and a way to set posts plumb and deep. But automated gates are different.
A gate actuator under load is dangerous. A swing gate closing on a person or a car delivers real force, and the safety sensors and reversal settings are not optional. The low-voltage wiring has to be routed in conduit below grade, and the control board programming for force limits and travel stops needs to be done correctly the first time. We do not recommend DIY automation on anything larger than a lightweight Pedestrian Gate, and even then, the sensor alignment matters.
If you have already bought a kit and want a professional to finish the job, we will give you an honest look. Sometimes the kit is fine and we install it at standard labor rates. Sometimes the kit is undersized for the gate, and we tell you that in writing rather than installing something that will fail in six months.
FAQs – Gate Installation Cost
How much does a basic gate installation cost in Las Vegas?
A basic manual single-swing gate in Las Vegas runs $800 to $2,200 installed on existing posts. If you need new posts set in concrete, add $600 to $1,500. Call (725) 777-5391 for a written quote on your specific driveway.
What does an automated gate cost in Las Vegas?
A complete automated single-swing gate in Las Vegas costs $3,800 to $6,500 installed, including the gate, actuator, safety sensors, keypad, and controls. Double-swing and slide gates run higher, starting around $5,500. We give the exact price in writing before any work starts.
Is it cheaper to repair or replace a gate?
In most Las Vegas cases, repair is cheaper. A new actuator is $1,400 to $2,800, and a welded hinge repair or post straightening is often under $900. Replacement makes sense when the gate itself is rusted through at the rails or the posts are leaning beyond correction. We will tell you which one your situation calls for and put the recommendation in writing.
How long does gate installation take in Las Vegas?
Most single-swing automated gate installations take one day on site. Double-swing and slide gates usually take two to three days, plus concrete cure time on new footings. If an HOA approval is required, the total timeline from quote to completion is typically three to six weeks, with the HOA review being the variable.
Do Las Vegas gate installs need a permit?
Most new gate installs with footings require a building permit, and fees range from about $75 to $350 depending on the jurisdiction and scope. Some HOAs add review time. Portcullis Gate Repair handles the paperwork and itemizes the fees separately on your quote.
Can you install a gate the same week?
For a standard single-swing automated gate with no HOA approval needed, we can often schedule the install within one to two weeks depending on steel fabrication lead time at local shops. Call (725) 777-5391 and a live person will check the schedule and give you a real arrival window.
How to Get a Free Gate Installation Estimate in Las Vegas
The fastest way to get a real number is to call (725) 777-5391. A live person answers any hour, day or night, including holidays. We will ask a few questions about your driveway, your current gate or posts, and what you want the gate to do. Then we schedule a visit. A uniformed, background-checked technician comes out, measures, inspects the soil and the existing posts, and hands you a written price before anything is ordered.
That written price is the number you pay. No additions at the end, no “we found something while we were working” surprises. And the installation carries the 365-Day Done Right Promise: if the automation fails inside a year, we come back and fix it at no charge.
We are Portcullis Gate Repair Las Vegas, an independently owned Kingswell company, home to gate installation and repair for the Las Vegas valley since 2008. For a full look at what we install, see our Gate Installation in Las Vegas page. Or just call. Dean Prescott leads our Las Vegas team, and he will make sure the number you get is the number you pay.
Pricing reflects the Las Vegas market as of 2026. Portcullis Gate Repair Las Vegas offers free estimates – call (725) 777-5391.
Written by Dean Prescott, Owner at Portcullis Gate Repair Las Vegas, serving Las Vegas since 2008.
What Our Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."
- Rhonda Mikula