Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Las Vegas Homeowners
A gate that won’t open in Las Vegas isn’t just a hassle, it’s a car trapped in the driveway and a property left unsecured. Portcullis Gate Repair Las Vegas has fixed broken gates across the valley since 2008, from Summerlin South to Anthem, and we answer the phone with a live person around the clock. Our technician shows up in a marked truck, hands you a written price before touching a single bolt, and leaves a 365-Day Done Right Promise on the invoice. If the repair fails inside that year, we come back and fix it at no charge. Call (725) 777-5391 and tell us what your gate is doing, or not doing, and we’ll give you a real arrival window on that call.
Driveway Gate Repair
Driveway Gate Repair covers everything from a misaligned track to an actuator that hums but won’t move the gate leaf. Las Vegas driveways take a beating from wind-blown sand and summer heat that cooks the grease out of hinge bearings. When a driveway gate fails, it’s usually one of three things: the operator lost its limits, a wheel or roller shattered, or the gate itself sagged on its post. Portcullis Gate Repair Las Vegas technicians diagnose on site before recommending anything, and the written quote covers parts and labor with no surprise line items. Most driveway gate repairs in Las Vegas run $180 to $650 depending on what actually failed.
Acoustic Actuator Diagnosis
We listen first. A grinding BFT or a chattering Linear actuator tells us more in twenty seconds than a visual check alone. The sound narrows it to gears versus motor versus limit switch before we unbolt anything.
Track and Wheel Alignment
Sand and grit from desert wind work their way into tracks and chew up nylon rollers faster than most homeowners expect. We pull the wheels, clean the track, and perform Gate Realignment so it doesn’t bind again next month.
Styles & brands we work with
Gate Welding
Gate Welding repairs the structural steel or iron that bolted parts can’t. When a gate leaf cracks at a stress point, when a hinge plate tears loose from the frame, or when a picket snaps at the weld, bolting on a patch won’t hold. The desert heat cycles in Las Vegas expand and contract metal daily, and that repeated flexing eventually breaks welds on older gates. Portcullis Gate Repair Las Vegas carries mobile welding rigs and our technicians are experienced with both stick and MIG on site. A basic crack repair runs $120 to $300, while re-hanging a heavy gate with new hinge plates and reinforcement typically lands between $300 and $800.
Stress-Crack Repair on Swing Gates
The hinge side of a swing gate carries the entire leaf’s weight every time it moves. We grind out the old crack, weld both sides, and add a gusset plate so the repair outlasts the original weld.
Hinge Plate Replacement and Reinforcement
When a hinge tears off a post or the gate frame, the common fix isn’t just re-welding the old plate back on. We cut away fatigued metal, weld in fresh plate, and perform Hinge & Post Repair so the load spreads across the post properly.
Commercial Gate Repair
Commercial Gate Repair handles the bigger hardware on apartment complexes, HOAs, warehouses, and retail lots. A failed commercial gate in Las Vegas means residents blocked out, deliveries stuck at the road, or a loading bay exposed overnight. These systems cycle hundreds of times a day, which is why the operator, the track, and the safety loops fail at predictable intervals. Portcullis Gate Repair Las Vegas has serviced commercial operators across the valley since 2008, including Viking and Linear systems that dominate local properties. Commercial repairs run $350 to $2,500 depending on the operator and the damage, with a written quote before anything gets disassembled.
Loop Detector and Safety Edge Testing
A commercial gate that closes on a car is a liability. We test the induction loops and photo eyes on every commercial call, not just the part that’s visibly broken, so the repair doesn’t leave a second failure waiting to happen.
High-Cycle Operator Overhauls
Apartment gates in high-density areas like Spring Valley and Sunrise Manor often cycle more than 500 times a day. That kills gearboxes and clutch packs. We can often rebuild the operator on site rather than quote a full replacement.
Iron Gate Repair
Iron Gate Repair addresses rust, sagging, and broken pickets on the ornamental and security gates common across Las Vegas neighborhoods. Iron expands and contracts in the desert heat, and powder coating that looks intact can hide rot underneath at the bottom rail where irrigation water splashes. We cut out rotted sections, weld in new material, and match the finish as closely as the existing coat allows. Iron gate repair in Las Vegas typically runs $180 to $600 for section replacement and hinge work, with full rust remediation and repainting priced per linear foot after we measure on site.
Rust Remediation at the Base Rail
Most iron gates rot from the bottom up because sprinkler water and pool splash keep the base rail damp. We remove the rotted steel, weld in matching bar stock, and seal the repair so the same spot doesn’t rust through again in two years.
Sagging Gate Correction
An iron gate that drags on the driveway is usually a post problem more than a gate problem. We check the post plumb and the hinges for play, then correct the sag with adjusted hinges, a welded shim plate, or a rebuilt post footing.
Sliding Gate Repair
Sliding Gate Repair fixes the cantilever and rolling gates that close across driveways at commercial lots and larger residential properties. The two biggest killers of sliding gates in Las Vegas are grit-packed tracks and worn counterweights. A sliding gate that jumps its track or shudders when it moves usually has a broken roller, a bent track section, or a gear rack that’s pulled loose from the frame. Portcullis Gate Repair Las Vegas replaces rollers, re-tracks gates, and remounts rack sections on site. Typical sliding gate repair runs $200 to $1,200, and a chain failure on a cantilever gate is usually on the lower end of that range.
Roller Carriage Replacement
The carriage holds the gate up and lets it roll. When a carriage bearing seizes, the gate grinds to a halt or tears the track. We replace the carriage and bearings as a matched set rather than pressing in one bearing and hoping the other survives.
Rack and Chain Realignment
A sliding gate that lurches is usually fighting a misaligned rack or a loose chain. We reset the rack to the gate’s natural travel line and tension the chain so the operator doesn’t overwork itself into an early failure.
Wrought Iron Gate Repair
Wrought Iron Gate Repair focuses on the decorative gates that front thousands of Las Vegas homes, from Green Valley to Aliante. True wrought iron is rare; most of what we service is mild steel formed into scrollwork and pickets. The scrollwork is where repairs get tricky because each curl is load-bearing enough to crack when the gate racks. We match the scroll pattern where we can, weld the break, and blend the repair so it disappears under paint. Wrought iron gate repair in Las Vegas generally runs $150 to $550 for scroll and picket work, and full gate re-squaring with multiple welds lands between $400 and $900.
Scrollwork and Picket Welding
Broken scrolls aren’t cosmetic. When a scroll separates, the gate loses structural integrity and the remaining welds take more load. We weld each break and often add a discreet backing fillet so the next heat cycle doesn’t pop the same joint.
Post-to-Gate Rehanging
When a wrought iron gate starts drooping, the fix usually involves more than tightening the hinge bolts. We reset the post, shim or replace the hinges, and re-hang the gate so it latches square and swings without scraping.
Metal Gate Repair
Metal Gate Repair is the broader category that covers steel, aluminum, and iron gates on any residential or commercial property in Las Vegas. Aluminum gates fail differently than steel: they dent and bend rather than crack. Steel rusts and fatigues. Knowing which metal you’re working with changes the repair approach, which is why we always identify the material before recommending a fix. Metal gate repair in Las Vegas typically runs $180 to $650 for structural repairs, with complete frame straightening or section replacement on larger gates running higher. Every job gets a written price before work starts.
Aluminum Frame Straightening
A bumped aluminum gate can bind against the post or fail to latch. We straighten the frame cold when feasible, which preserves the metal’s temper, and replace bent sections when the deformation is beyond saving.
Steel Frame Reinforcement
Older steel gates in Las Vegas were often built with thinner wall tube than modern codes require. When we find a gate flexing because the frame is undersized, we weld in internal stiffeners rather than just patching the visible damage.
Wood Gate Repair
Wood Gate Repair deals with the cedar, redwood, and pine gates that enclose many Las Vegas backyards and side yards. Wood gates rot, warp, and split in the dry heat; the top hinge pulls out of rotted wood, the gate hits the latch post, and then someone forces it and breaks the frame completely. We repair frames, replace rotted stiles, add anti-sag kits that actually work, and reset hinges into fresh material rather than filling old holes with wood filler. Wood gate repair in Las Vegas runs $150 to $500 for most frame and hinge work, with full gate rebuilds priced on site after we see the existing structure.
Anti-Sag Kit Installation
A sagging wood gate needs a tensioned diagonal, not a third hinge. We install proper anti-sag kits with turnbuckle adjustment so the gate hangs square and the latch lines up again.
Rotted Stile Replacement
When the vertical stile holding the hinges has rotted, there’s nothing left to screw into. We replace the stile, predrill for the hinge screws, and often upgrade the hardware to stainless so the next repair is years away instead of months.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our Las Vegas technicians carry factory training and service experience on the operators you’ll find throughout the valley. Viking operators dominate commercial and HOA installations in Las Vegas, and we stock their common gearboxes, limit switches, and control boards on our trucks. Linear residential and commercial units are standard in Paradise and Sunrise Manor HOAs. We know their wiring layouts and fault codes well enough to diagnose most issues on the first visit.
We also service BFT hydraulic and electromechanical operators, which show up on higher-end residential gates and require specific hydraulic knowledge. And Ghost Controls DIY-installed systems cross our path often in newer neighborhoods where the original installer didn’t set the limits correctly. And whether you have one of these brands or something else entirely, we can help.
Signs You Need a Pro Right Now
- The gate stops mid-travel and reverses. This usually means a safety sensor is blocked, a safety edge is failing, or the operator’s force settings have drifted. It’ll get worse, and a gate that reverses unpredictably is dangerous to anyone walking through it. A Las Vegas gate technician can diagnose the actual fault instead of guessing.
- The gate makes a grinding or squealing noise. That’s metal on metal where it shouldn’t be, often a dry or failed bearing, gearbox, or roller. Running it longer destroys the surrounding parts. Call before the grinding turns into a full seizure.
- The gate sits crooked or drags on the driveway. A gate that scrapes the concrete is telling you something structural has shifted. It could be a broken weld, a rotted wood frame, a failing hinge, or a post that’s no longer plumb. Forcing it open by hand makes the repair bigger.
- The remote, keypad, or intercom stopped working. Before you assume the operator died, check the obvious: batteries, power, and the breaker. If those are fine and the gate still won’t respond, there’s a receiver, board, or wiring fault. We trace those on site.
- The gate won’t stay closed or latched. A gate that drifts open on its own is a security problem, full stop. The latch is worn, the limits are set wrong, or the lock is failing. Our Las Vegas technicians fix the underlying cause so the gate actually secures the property again.
Our Process, Step by Step
- 1
You call and a live person answers. No voicemail tree at (725) 777-5391. You describe the problem, and we give you a real arrival window, not a vague “sometime Thursday.” Same-day service is available across most of the Las Vegas valley.
- 2
The technician arrives on time, in uniform, with ID. Our trucks are marked Portcullis Gate Repair, and our technicians are background-checked. You know who’s at your property before we touch the gate.
- 3
We diagnose and write the price down. We test the operator, check the mechanicals, and find the root cause. Then we hand you a written quote covering parts and labor before any work begins. That price doesn’t change unless you approve additional work.
- 4
We perform the repair and clean the site. The work happens then and there in most cases because our trucks carry common parts for all nine brands we service. We sweep up, pack out old parts, and leave the gate testing correctly.
- 5
You receive the 365-Day Done Right Promise in writing. The guarantee is printed on the invoice, not promised over the phone. If the repair fails inside a year, we come back and make it right at no charge. One free return visit, no argument.
How Much Does Gate Repair Cost in Las Vegas?
Gate repair pricing in Las Vegas breaks down into a few common scenarios. A basic hinge replacement or Lock Repair runs $120 to $250. An actuator swap, the motorized arm that pushes a swing gate open, typically lands between $350 and $650 parts and labor. Sliding gate roller and track work runs $200 to $1,200 depending on how many rollers failed and whether the track needs straightening. Commercial operator overhauls start around $350 and can reach $2,500 for high-cycle systems that need a gearbox and control board. A full gate replacement, by comparison, starts around $1,800 for a basic steel gate and goes up from there. What affects the price: the gate’s size and weight, the operator brand, whether we can reach the site with our truck close by, and whether the existing hardware can be reused. To avoid overpaying, get the price in writing before work starts, ask what’s included, and don’t let any company disassemble your gate before quoting. Our estimates are free, on site, and written on paper.
Our Service Area Near Las Vegas
Portcullis Gate Repair Las Vegas covers the entire valley. We run calls to Gate Repair in Paradise, Gate Repair in Summerlin South, plus Anthem, Green Valley, Winchester, Sunrise Manor, Nellis AFB, Whitney, Aliante, North Las Vegas, and Spring Valley. Most neighborhoods see a technician the same day. If you’re on the edge of the valley, call us and we’ll give you an honest arrival window on the spot.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Las Vegas
Gate repair is fixing the mechanical, structural, or electrical systems that make a gate open, close, latch, and stay secure. That includes the operator, hinges, wheels, track, actuators, sensors, keypads, and the gate frame itself. A Las Vegas gate repair typically costs $120 to $650 for residential work, with commercial jobs running higher. Call (725) 777-5391 for a specific quote after we see your gate.
Most residential gate repairs are completed in a single visit, usually within one to two hours on site. Commercial overhauls and structural welding can take half a day or more. We’ll give you a realistic time estimate with your written quote. Call (725) 777-5391 to schedule a same-day visit.
Residential gate repair in Las Vegas runs $120 to $650 for typical fixes, while commercial operator work runs $350 to $2,500. Structural welding, sliding gate track replacement, and full actuator swaps fall inside those ranges depending on parts and labor. We quote the exact price in writing before any work starts. Call (725) 777-5391 for a free estimate.
Yes. We service Viking operators across Las Vegas, from HOA gates in Green Valley to commercial lots in Spring Valley. Our trucks carry common Viking parts, including gearboxes, limit switches, and control boards. Call (725) 777-5391 if your Viking operator is acting up.
Yes. A live person answers our phones 24 hours a day, 7 days a week, including holidays. If your gate is stuck open and your property is unsecured, or stuck shut and your cars are trapped, call (725) 777-5391 and we’ll dispatch a Las Vegas technician as soon as possible.
Every repair carries the 365-Day Done Right Promise, printed on your invoice. If the repair fails within one year, we come back and fix it at no charge. The guarantee covers the parts and labor on the repair we performed. Call (725) 777-5391 for more details.
Clear the area around the gate so the technician can work safely, and have your remote control or keypad code available if the operator is part of the problem. If you have a commercial gate, let us know the property manager’s contact info so we can coordinate access. Our technician handles the rest, including the written quote before any work begins.
Schedule Your Gate Repair Service in Las Vegas Today
If your Las Vegas gate is broken, sagging, or won’t respond, call Portcullis Gate Repair at (725) 777-5391. A live person answers around the clock, the estimate is free, and the price is in writing before any work begins. We’ll show up in the window we gave you, fix the gate, and hand you the 365-Day Done Right Promise on paper.
Written by Dean Prescott, Owner at Portcullis Gate Repair Las Vegas, serving Las Vegas since 2008.