A Portcullis company - serving Las Vegas, NV

Ghost Controls Electric Gate Repair Nationwide

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Electric Gate Repair in Las Vegas: What to Know First

Ghost Controls electric gate repair in Las Vegas typically runs $210 – $480 for most jobs, and our techs complete the majority of repairs in a single visit. Independent Ghost Controls service is what we do – we’re not the manufacturer, but we know these openers inside out, from the arm assemblies to the control boards. You’ll get a written price before we turn a single bolt, and every repair is covered by the Kingswell Guarantee for 365 days. If you’re reading this because your Ghost Controls gate stopped responding, call (725) 777-5391 and tell us what the gate is doing – or not doing. Dean Prescott or one of our techs will give you a straight answer on cost and timing.

Call (725) 777-5391

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds residential swing and slide gate openers sold through big-box retailers, and we see specific patterns in Las Vegas that differ from other brands. Here’s what actually breaks and what we do about it.

  • AXDP and AXD series actuator arm failures: The actuator – the motorized arm that physically pushes the gate open – is the hardest-working part on a Ghost Controls swing system. In Las Vegas, the heat and wind load on larger gates stress the internal limit mechanism. Symptom: the gate opens halfway and reverses, or grinds at the end of travel. We replace the arm assembly with the correct OEM-rated unit, then reset the travel limits so the motor isn’t fighting the gate at full extension.
  • R Series control board capacitor burnout: Ghost Controls’ R Series boards sit inside a plastic housing that bakes in direct sun here. Capacitors on the power-input side swell and fail after two or three summers. Symptom: the operator clicks but won’t move the gate, or the gate opens but won’t close. We replace the board and, on a lot of homes, relocate or shield the housing so the next board doesn’t cook the same way. That’s a fix you won’t find in the Ghost Controls manual.
  • TSS1 and TSS1XP photo eye misalignment: The safety sensors – the two eyes mounted near the gate path that stop the gate if something crosses it – drift out of alignment on gates with fence posts that shift in Las Vegas clay soil. Symptom: the gate reverses immediately after starting, or the opener beeps but won’t move. We realign the eyes, check the wiring through the post, and replace the sensor pair if the lenses are UV-hazed. Ghost Controls owners often assume the board is bad when it’s actually the eyes; we check both before selling you anything.
  • KPW series keypad dead buttons: The wireless keypad lives outside, and Las Vegas dust gets under the membrane. Buttons stop registering, especially 1, 3, and 7. We open the keypad, clean the contact points, and if the membrane is cracked we replace the keypad and reprogram it to your opener’s learn frequency. Takes fifteen minutes on most models.
  • Battery backup and solar drawdown on slide gates: On Ghost Controls slide systems with a 12V battery, the trickle charger under-charges when daytime temperatures cross 110°F and the board’s thermal protection kicks in. Symptom: the gate works in the morning, dead by 3pm. We test the battery under load, replace it if it’s dropped below capacity, and verify the charging path isn’t being interrupted by heat cycling. On solar setups we check the panel output and wiring gauge, because Ghost Controls solar installs with undersized wire fail slowly and look like motor problems.
Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Our Ghost Controls Electric Gate Repair Process

Here’s how a Ghost Controls repair goes when you call Portcullis Gate Repair Las Vegas.

  1. 1
    You call (725) 777-5391. A live person answers – day or night. You describe what the gate is doing. We ask specific questions: swing or slide, one arm or two, how old the keypad is, what the opener sounds like when you press the remote.
  2. 2
    We arrive in the window we gave you. Our techs are background-checked and in uniform. They check the gate before touching anything – manual release, travel path, hinge points, then the opener itself.
  3. 3
    Diagnosis on the first visit. Dean’s crew tests the actuator, limit switches, control board, remote receiver, and safety eyes in that order. We find the actual problem, not the easiest thing to sell.
  4. 4
    You get a written price before any work starts. We write down parts, labor, and what’s needed now versus what can wait. You approve the number. Nobody disassembles anything until you do.
  5. 5
    We repair it properly. We use OEM Ghost Controls parts where warranty or fit matters, and quality aftermarket parts where they’re actually the better call – like a metal-geared replacement actuator arm on older AXD models. We’ll tell you which we’re using and why.
  6. 6
    We test the full cycle, then clean up. The gate runs, reverses, and stops correctly. The job site is cleaner than we found it. You get the written Kingswell Guarantee on your invoice, good for 365 days. If that repair fails inside the year, we return and fix it at no charge under the 365-Day Done Right Promise.

What Ghost Controls Electric Gate Repair Costs in Las Vegas

Here are real numbers for the Ghost Controls jobs we see most in Las Vegas.

Repair Typical Range
Keypad replacement (KPW series) $95 – $180 parts and labor
Photo eye realignment or replacement (TSS1/TSS1XP) $130 – $240 parts and labor
Control board replacement (R series) $260 – $480 parts and labor
Actuator arm replacement (AXDP/AXD) $310 – $550 parts and labor per arm
Full diagnostic service call (no repair) $79 – $125, credited toward repair if you approve the work

What moves the price: single versus dual arm, gate length and weight, whether the wiring to the opener is original, and whether the board housing needs relocation for heat. Every quote is written down before work begins. Call (725) 777-5391 for an exact quote – estimates are free.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Las Vegas Homeowners Call Portcullis Gate Repair Las Vegas for Ghost Controls Work

Plenty of gate companies in Las Vegas will say they can fix a Ghost Controls opener. Few have a written guarantee that means anything thirty days later. Ours runs 365 days, it’s stamped on your invoice, and it includes a free return visit if the repair fails. We founded Portcullis in 2008 as a Kingswell company, and every Kingswell location – independently owned, including ours – is bound to the same four promises: a written price before work starts, a real arrival window, a clean job site, and a written guarantee. Our techs service nine operator brands, so if your Ghost Controls unit is older and the honest answer is that replacement makes more sense than another repair, we can talk you through LiftMaster, Mighty Mule, and DoorKing options without bias. Tell me what the gate is doing – or not doing – and I’ll give you a real number before I touch a single bolt.

FAQs

Call Portcullis Gate Repair Las Vegas for Ghost Controls Electric Gate Repair

Stop guessing at the cause. Call (725) 777-5391 and tell us what your Ghost Controls gate is doing. We’ll send a background-checked, uniformed tech who knows these openers specifically, give you a written price before any work starts, and back the repair in writing for 365 days. Serving Las Vegas, Summerlin, Henderson, North Las Vegas, and the surrounding valley – with a live person answering 24/7.

Written by Dean Prescott, Owner & Lead Technician, Portcullis Gate Repair Las Vegas at Portcullis Gate Repair Las Vegas, serving Las Vegas and nearby areas.

Need Gate Repair help in Las Vegas? Licensed & insured · 1-hour response · free estimates
Call (725) 777-5391
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Portcullis Gate Repair Las Vegas responds fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch