Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Whitney, NV
Gate repair in Whitney usually falls into two buckets: mechanical failures on aging swing gates, and operator or sensor trouble on electric units from the 1990s and 2000s. Most of the homes here were built between the 1960s and 1990s with original decorative steel or wrought-iron driveway gates, and a lot of them are now sagging, rusted, or misaligned. The caliche soil under Whitney doesn’t help – it hardens like concrete in the dry months, then softens and shifts after monsoon rains, which is exactly what pulls shallow posts out of plumb. If your gate drags the ground or won’t latch, call us at (725) 777-5391 and we’ll give you a straight answer on what it’ll take to fix.
Why Whitney Homes Are Different
Whitney’s gate work is shaped by three things that don’t apply five miles west of here. First, the housing stock: this is one- to two-story stucco and wood-frame construction, much of it forty to sixty years old, with gates that were installed when the house was built. Those gates have lived through decades of 100°F-plus summers, and the metal fatigue is real. Second, the soil. Caliche is a calcium carbonate layer that sits just under the topsoil in much of Whitney. When it’s dry, it’s nearly as hard as poured concrete – which sounds great until you realize the original posts were often set only two feet deep and never had a chance to anchor properly. When monsoon rain saturates the ground, that same caliche turns slick and loses its grip, and the post starts leaning within a season. Third, the sun. Intense UV exposure fades powder coating and bakes the internal gears and limit switches on openers. We regularly replace hinge pins that have simply worn oval from years of a heavy gate swinging in the wind, and we almost always recommend deeper, concrete-anchored post footings when we rebuild a Whitney gate that has leaned even once.
Styles & brands we work with
Our Main Whitney Services
Homeowners in Whitney call us most often for two things: a gate that won’t open or close properly, and a gate that needs to be replaced entirely. Electric gate repair sits right between the two. Here’s what each service covers locally.
Gate Repair in Whitney
Most repair calls in Whitney involve hinges that have seized or worn out, posts that have shifted out of alignment, or a gate leaf that’s dragging on the driveway because the frame has sagged. On the older steel and wrought-iron gates common here, we also see a lot of rust at the bottom rail where sprinkler water hits the metal every morning. We replace hinges, cut and weld frame sections where needed, and re-anchor posts in concrete when the caliche has let them move. Learn more about Gate Repair in Whitney.
Gate Installation in Whitney
When an old Whitney gate is too far gone to save – or when a homeowner wants a lighter, modern gate that won’t strain an aging opener – we install from scratch. Every installation starts with the post footings, and in this soil that means digging deeper than the original contractor ever did, then setting the posts in concrete with rebar reinforcement. From there it’s the gate itself, the hinges and latch, and any operator you want paired with it. See Gate Installation in Whitney for the full scope.
Electric Gate Repair in Whitney
Electric gate failures in Whitney tend to follow the heat. Limit switches drift, circuit boards overheat inside their housings, and the photoelectric sensors get coated in fine desert dust until the gate refuses to close. We troubleshoot the full system: the operator, the wiring, the safety edges, and the keypad or remote receiver. It’s a diagnostic job first, then a fix, not a guess. Details at Electric Gate Repair in Whitney.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
Our Whitney techs carry parts and programming experience for LiftMaster, Elite, and FAAC operators, along with Mighty Mule hardware on the residential side. We stock the common control boards, remote receivers, and limit switches for these brands, so most repairs are completed in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Whitney, NV
These are the typical ranges for gate work in Whitney, based on what we’ve seen across the area’s older gates and standard residential openers. Every job gets a written price before we touch a bolt, so these numbers won’t change on you at the door.
| Service | Typical range in Whitney |
|---|---|
| Gate hinge replacement (pair) | $120 – $260 |
| Gate post stabilization / re-anchoring | $250 – $500 |
| Swing gate actuator swap | $450 – $850 parts and labor |
| Gate opener control board replacement | $200 – $450 |
| Safety sensor / photo eye replacement | $90 – $200 |
| Gate wheel replacement | $80 – $180 |
| Full gate frame welding repair | $300 – $700 |
| Complete single swing gate installation | $2,500 – $6,000 |
| Electric gate operator installation (new) | $1,200 – $3,000 |
What pushes a Whitney job toward the higher end is usually the post work. If the caliche has undermined a post and the concrete needs to be broken out and re-poured, that adds labor and materials the original estimate has to account for. The opposite is also true: a simple hinge swap on a lightweight gate can come in under range. Either way, you’ll see the number in writing before the work begins, and it doesn’t change without your sign-off.
Neighborhoods We Serve in Whitney
We work throughout Whitney, from the older subdivisions near Russell Road up to the newer pockets along East Sunset. Because we’re dispatched locally, most Whitney calls get a technician within a few hours, and same-day service is common on repairs.
- Whitney Ranch
- East Whitney
- Sunrise Manor border area
- Nellis Boulevard corridor
- Sam Boyd Stadium area
Service Area – Cities Near Whitney
Beyond Whitney, our crews serve the surrounding valley on the same written-price terms. If you’re next door in Las Vegas, NV, Paradise, NV, Summerlin South, NV, or Anthem, NV, the guarantee and the pricing structure are identical.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
Most Whitney repair calls get a technician the same day, usually within a few hours. We schedule a real arrival window – not “sometime between 8 and 5” – and you’ll know exactly who’s coming. For urgent failures, call us any time and a live person answers.
Most residential gate replacements in Whitney don’t require a permit, but if the project includes new concrete footings or electrical work for an operator, Clark County rules can apply. We handle the paperwork when it’s needed and tell you upfront if your job falls under the permitting umbrella.
If the frame itself is rusted through or the post has moved more than a few inches, replacing the gate and re-setting the post is usually the smarter money. A leaning post in Whitney’s caliche soil usually means the original footing was too shallow, and simply straightening it won’t hold. We’ll tell you which side of that line your gate is on and quote both paths if that’s the better way to decide.
For a straight answer and a free estimate on any gate problem in Whitney, call (725) 777-5391. We’ll give you a written price before any work starts, and back the repair with our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace