Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Summerlin
New gate installation in Summerlin typically runs $2,800 – $9,500 for a standard residential driveway gate with automation, and most custom ornamental jobs land between $6,000 and $18,000 depending on material weight, opener type, and HOA finish requirements. We quote the full job in writing before any fabrication begins. If you live in The Trails, The Ridges, Red Rock Country Club, or anywhere else in the 89135, 89138, 89144, or 89145 ZIP codes, our crews know the streets, the HOAs, and the soil conditions that affect how a gate should be set. Call (725) 777-5391 and a live person will actually answer.
Dean Prescott leads our installation work here, and the standard he holds every crew to is simple: the gate should open silently on day one and still do it on day 400. That’s what the written Kingswell Guarantee is for. You’ll get a real arrival window, a clean trench and form line, and a gate that matches the architectural language of your street.
Why Portcullis Gate Repair Las Vegas Is Summerlin’s Preferred Gate Installation Company
We’ve been installing and repairing gates as a Kingswell company since 2008, and a large share of our work happens inside Summerlin’s gated enclaves. The reason is straightforward: this is a master-planned community with thousands of homes behind automated gates, and those gates take a beating from the Mojave sun. Homeowners here don’t want a crew that installs a generic gate and disappears. They want someone who knows that a heavy ornamental swing gate on a west-facing driveway in Summerlin South will bake in 110-degree heat every July afternoon, and that the operator chosen for that exposure matters more than the gate itself.
Our technicians arrive in uniform, background-checked, and carrying the parts most Summerlin jobs actually need: heavy-duty hinge posts, powder-coat touch-up kits, solar shielding for control boards, and sheet metal brackets sized for stucco pillars. Response time to any Summerlin address is typically same-day for quotes and within a few days for scheduled installs, because we dispatch from the Las Vegas metro and keep local material suppliers on speed dial. When a Ridges resident needs a bronze finish matched or a custom spear-top ironwork pattern fabricated to HOA spec, we don’t have to explain the requirement. We already know it.
Styles & brands we work with





Automatic Gate Installation in Summerlin
Automatic Gate Installation in Summerlin means pairing the right operator with the right gate for the right sun exposure and duty cycle. Most of our Summerlin installs are swing gates on ornamental steel or iron, though slide gates and pedestrian gates are common too. A basic single swing gate with a chain-driven operator typically runs $3,200 – $5,800 installed. Going to a linear arm actuator or an underground operator on a heavy custom gate pushes the job to $6,500 – $14,000. We’ll give you the exact number in writing before any concrete gets poured.
Summerlin’s environment punishes under-specified equipment. A light-duty residential opener that works fine in a coastal city will cook its circuit board inside three summers here. That’s why we lean on brands like BFT and Viking for heat-tolerant, high-cycle operators, and why we always vent control boxes and add a secondary cooling opening when the box faces direct afternoon sun.
Underground Operators for Ornamental Gates
Many Summerlin homeowners don’t want a visible operator arm bolted to their custom gate. An underground operator hides the entire drive mechanism below grade, leaving only the gate leaf and its hinge posts visible. It costs more, usually $2,000 – $4,000 over a surface-mounted alternative, but on a $12,000 custom gate in a design-controlled community, it’s often the only solution that satisfies the HOA and the homeowner’s eye.
Matched Entry Systems for Gated Communities
When we install an automatic gate in Summerlin, we also handle the intercom, keypad, and camera integration. Call boxes get hardwired where possible, because wireless systems degrade faster in extreme heat. We coordinate the whole package so you’re not juggling a gate installer and a separate low-voltage contractor.
Gate Installation Services in Summerlin
Gate Installation Services in Summerlin covers everything from a single pedestrian gate off the courtyard to a full-width driveway double gate with matched automation. The first step is always an on-site measurement and a written quote. We don’t ballpark it over the phone and then change the number when we see the job. The price we write down is the price you pay, period. That’s the Kingswell Guarantee, not a marketing line.
For a typical Summerlin stucco home with a 12-foot driveway opening, a new welded steel single swing gate with automation, safety photocells, and a keypad runs $3,800 – $6,200 installed. A double gate, which is two leaves, doubles the hinge hardware and often needs a stronger operator, landing between $5,500 and $9,800. Custom ornamental iron with a powder-coat finish matched to the HOA palette adds $1,500 – $4,000 depending on pattern complexity and fabrication time.
Custom Ornamental Fabrication
We fabricate most custom panels off-site at our Las Vegas shop, not in your driveway. That means clean welds, a proper jig for spear-top patterns, and a powder-coat bake that won’t flake after one summer. Your HOA gets the exact finish and silhouette they require, and you get a gate that looks like it was always part of the house.

Post Footings Built for Desert Soil
Summerlin’s caliche-heavy soil looks solid but doesn’t always hold. Undersized footings crack under the weight of a heavy ornamental gate within the first year, which is why we over-dig and over-reinforce every hinge post for a heavy leaf. That’s the difference between a gate that sags after one season and one that swings true through a decade of monsoon seasons.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Summerlin
We install and service operators from BFT, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. The important part isn’t the list; it’s that we stock control boards, photo eyes, remotes, and gear assemblies for these brands locally, so a Summerlin replacement doesn’t wait a week on a distributor. When a Viking operator on a slide gate in Summerlin South needs a new limit switch, our truck usually has it. When a Linear swing arm needs a fresh capacitor after a heat event, we’re not special-ordering it. That speed matters when your gate is stuck open on a Saturday afternoon.
Common Gate Installation Problems We See in Summerlin Homes
- Undersized post footings cracking under heavy ornamental gates. We see this all the time in The Ridges and Red Rock Country Club, where gates weigh 600 to 1,200 pounds. A standard 18-inch footing will lean within a season. We spec 24 to 30-inch reinforced footings for heavy leaves so the hinge post stays plumb.
- Heat-fried control boards and plastic gear housings. Summerlin’s triple-digit stretches, especially July and August, cook exposed circuit boards and warp plastic drive gears. We install ventilated housings, relocation brackets for controllers, and metal-gear operators wherever possible to keep the gate running through the worst of it.
- Monsoon sand and debris jamming slide gate tracks. When the summer storms roll off the Spring Mountains, they push sand and grit into track channels and rack-and-pinion drives. This trips the entrapment protection and leaves the gate stuck open. We recommend elevated track systems and rubber seal kits for Summerlin slide gate installs, and we clean and lubricate the runs during annual service.
- Powder-coat mismatch triggering HOA violations. We’ve had customers call us after a cheaper installer hung a black gate in a community that requires a specific bronze finish. The HOA noticed within a week. Our crews carry matched powder-coat swatches and check the village design guidelines before fabrication begins.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Summerlin, NV
Here are the numbers we quote most often across Summerlin. A basic single swing driveway gate with a surface-mounted operator runs $3,200 – $5,800. A double ornamental swing gate with a heavy-duty linear arm lands between $6,500 and $12,500. A custom slide gate with automation and a powder-coat finish runs $5,800 – $11,000. Pedestrian gates are smaller jobs, $1,200 – $3,500 depending on material and automation. Underground operators add $2,000 – $4,000 to any swing gate project. Every quote includes the price of the gate, the operator, the concrete work, the safety features required by code, and the labor. You’ll see it all written down before we start, and that number doesn’t change unless you change the scope.
Call (725) 777-5391 for a free measurement and written estimate. Dean or one of our project leads will come out, walk the site, and hand you a number you can actually plan around.
A Word on Summerlin’s HOA Design Standards
Summerlin isn’t one HOA; it’s dozens of village associations, each with its own architectural review committee. In many communities, gate finishes and ironwork patterns are written into the CC&Rs. A gate that doesn’t match the approved palette can trigger a violation letter, a demand to repaint, and in worst cases, a fine that sits on your HOA account. Our installation crews carry matched powder-coat swatches and custom fabrication templates so we can duplicate the exact spear-top pattern, scrollwork, or solid-panel silhouette the committee approved. We also handle the submittal paperwork when your HOA requires an architectural review application before installation. That’s something a general fence company usually won’t do.
In The Ridges, we recently installed a custom ornamental swing gate with a hidden LiftMaster operator and a stainless steel hinge post set deep in a new post footing. Because the HOA required a specific bronze powder-coat and a spear-top ironwork pattern, we fabricated the panels off-site and matched the finish exactly before mounting the gate, then calibrated the safety photocell and loop detector so the gate glides silently past the stucco pillars without a hint of sag. That job was only possible because we knew the design guidelines before we cut the first piece of steel.
The intense UV exposure in the Las Vegas Valley does two things to a poorly chosen finish: it fades it, and it makes the fade obvious, because one side of the gate bakes while the other stays shaded. We specify polyester powder coats with UV stabilizers, not the cheaper epoxy finishes that chalk and dull within two summers. Your HOA won’t send you a letter, and your gate won’t look ten years old after eighteen months.
We Also Serve Cities Near Summerlin
Our crews regularly install gates in Summerlin and the surrounding Las Vegas Valley. We also serve Las Vegas, Paradise, Summerlin South, and Anthem. If you’re just outside the Summerlin master plan boundaries, you’re still in our service area, and the same written-price guarantee applies. Our main Gate Installation page covers the full scope of what we offer across the metro.
Serving Summerlin, NV - Our Local Coverage Area
We’re based in the Summerlin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Summerlin
Many Summerlin villages require gate finishes and ironwork patterns to match a specific architectural palette, which means we may need to fabricate to an approved design, submit an architectural review application, and match the powder-coat color before hanging the gate. This adds time and sometimes cost to a project, but it protects you from violation notices and forced repainting. We handle the submittal for you. Call (725) 777-5391 for a written quote that includes the design-compliance work.
Yes. We specify commercial-grade operators with metal gear housings, ventilated control boxes, and heat-shielded circuit boards for Summerlin installs. Brands like BFT and Viking hold up better in sustained 110-degree heat than cheaper residential units. We’ve replaced enough heat-fried boards in Summerlin to know exactly what fails and how to prevent it.
The footing is the foundation of everything. We pour 24 to 30-inch reinforced concrete footings for heavy custom gates, use stainless steel hinge posts, and set the hinges with the gate’s full weight in mind. A sagging gate almost always traces back to a footing that was too small or a hinge post that wasn’t set deep enough. We build it right the first time so you’re not calling us back for a sag correction in twelve months.
Yes. Federal safety standards and Nevada code require entrapment protection on all automatic gates, which means photo eyes, reverse-sensing edges, or both, depending on the gate type. We install and calibrate these on every project, and we test them before we leave. Skipping them isn’t a money-saver; it’s a liability, and it’s dangerous.
Yes, and we do it often. For Summerlin, we recommend a trackless cantilever slide gate or an elevated track system with sealed rollers so sand and monsoon grit don’t jam the carriage. A standard V-track system works, but it requires more cleaning and lubrication through the summer storm season. We’ll quote whichever option fits your property and let you choose with real numbers on the table. Call (725) 777-5391 for a free estimate.
If you want a gate that’s engineered for Summerlin rather than just installed in Summerlin, call us at (725) 777-5391. We’ll give you a written price, a real arrival window, and a gate that stands straight and runs quiet through every monsoon season and triple-digit afternoon the valley throws at it.
Written by Dean Prescott, Owner at Portcullis Gate Repair Las Vegas, serving Summerlin since 2008.