Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
Gate installation in Whitney runs $1,800 to $6,500 for most residential projects, with automatic operator systems adding $900 to $2,800 depending on the driveway layout and power access. We work throughout Whitney, from homes off Boulder Highway to the residential streets near Whitney Park and Sam’s Town, and we know what these 1970s-to-1990s gates need because we’ve worked on hundreds of them. Whether you’re replacing a rusted-out swing gate or adding an opener to a driveway that never had power, call (725) 777-5391 and we’ll give you a written price before anything gets ordered or installed.
Why Portcullis Gate Repair Las Vegas Is Whitney’s Preferred Gate Installation Company
Whitney homeowners tend to call us after another gate company has already let them down. The gates here are different from what you find in newer Las Vegas subdivisions. Many of them are original to homes built between the 1960s and 1990s, and they were never designed for modern safety requirements or the monsoon flash floods that hit this part of Clark County every summer. We’re a Kingswell company, which means every Whitney job comes with four written promises: a price in writing before any work starts, a real arrival window, a clean job site when we leave, and a written 365-Day Done Right Promise on the installation.
Dean Prescott, who leads our Whitney crews, has spent years working on the specific gate failures that show up around here: hinge posts that lean after a single hard rain, control boards fried by afternoon heat, and gates that were hung before UL 325 entrapment protection existed. We’re not a franchise call center. We’re an independently owned Kingswell location, held to the same standard as every other Kingswell company, and a live person answers our phone 24 hours a day.
Styles & brands we work with
Gate Fabrication in Whitney
Gate fabrication in Whitney means building a gate to fit the existing posts, or replacing the posts and gate together when the old footing has failed. This isn’t a stock-size job. Homes here were built over a 30-year span with wildly different driveway widths, post heights, and panel weights, so most Whitney gate fabrication projects start with a site measurement and a conversation about what’s actually holding the current gate up. A custom welded steel driveway gate in Whitney typically runs $2,200 to $5,500 depending on size, panel style, and whether we’re reusing your existing operator or installing new automation. Pedestrian gates run $850 to $2,400.
We fabricate with powder-coated steel and marine-grade fasteners because Whitney’s heat and UV exposure will eat through cheap hardware in two or three seasons.
Custom Driveway Gate Builds
Most Whitney driveways sit between 10 and 16 feet wide, which puts a single swing gate right at the weight limit where a homeowner-grade hinge starts to fail. We build our driveway gates with square-tube steel frames and welded hinge barrels, not lag screws into the post face. If the post is original and shallow-set, the honest answer is that a new gate on a failing post is wasted money. We’ll tell you that before we quote anything.
Pedestrian Gate and Railing Kits
Pedestrian gates in Whitney often hang beside a driveway gate that gets automated, and they need their own post inspection. We fabricate matching pedestrian gates so the whole front of the property looks intentional, not pieced together. Powder coating is included, and we match the driveway gate panel design when you want them to read as a set.
Automatic Gate Installation in Whitney
Automatic gate installation in Whitney starts with a realistic look at your power situation, because a surprising number of driveways here were poured without any electric run to the gate. We install operators from LiftMaster, FAAC, Elite, Mighty Mule, and others, and we stock common operator parts locally so Whitney customers aren’t waiting a week for a control board. A complete automatic gate installation in Whitney, including the operator, arm or slide mechanism, safety photocells, and a keypad or remote, typically runs $2,400 to $6,800. Solar-powered operators run slightly higher on hardware, but save you the cost of trenching power across the driveway.
Every automatic gate we install includes UL 325-compliant entrapment protection: photo eyes, audible alarms, and current sensing on the operator. If your existing gate was automated before those rules existed, a retrofit may be mandatory before we’ll put a new operator on it.
Operator Replacement and Retrofits
If your Whitney gate still has a working 1990s DoorKing or FAAC operator, the control board is likely on its last heat cycle. We replace operators on existing gates frequently, which costs $1,200 to $2,900 for most single-family swing gates. We’ll wire in new photo eyes and a keypad as part of the job, not as an upsell line item.
Solar Gate Openers for Whitney Driveways
When there’s no power at the gate and trenching a line across concrete or caliche isn’t practical, a solar operator makes sense. Whitney’s sunlight is relentless, which means a properly sized solar panel here keeps the battery topped off year-round. We install Ghost Controls and Mighty Mule solar systems regularly, and we’ll walk you through how the battery performs during the short winter days before you commit.
Trusted Brands We Service in Whitney
We work on nine major gate-operator brands, and for Whitney customers the ones that come up most are LiftMaster, FAAC, Elite, and Mighty Mule. Because we stock parts locally and send background-checked, uniformed technicians from our Las Vegas dispatch office, we can usually install or replace a Whitney operator within a few days of your initial call, not weeks. The technician who arrives already knows the specific system on your property because our scheduling team asks the right questions when you call. That’s part of The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Common Gate Installation Problems We See in Whitney Homes
- Shallow concrete footings that heave after monsoon rains. Whitney’s caliche soil hardens like concrete when dry, then turns soft and unstable when a summer storm dumps water on it. Posts set 18 inches deep in a bag of Quikrete lean within a year. We set new posts in 36-inch concrete footings with rebar so the gate stays true.
- Control boards cooked by heat stress. Afternoon temperatures above 100°F in Whitney shorten the life of older operator electronics, especially 1990s-era DoorKing and FAAC units. A dead control board often leaves the gate locked in place with no manual release, which is a safety problem, not just an inconvenience.
- Bottom hinge weld fatigue on heavy steel gates. Original decorative steel gates from the 1970s-1990s are heavy, and after 30 years of Nevada sun and wind, the bottom hinge weld is usually the first thing to crack. Fixing the weld without addressing a rotating post just means the crack comes back next season.
- Gates hung before modern safety requirements. If your Whitney gate never had photo eyes or an auto-reverse function, it does not meet current UL 325 standards. We retrofit entrapment protection on almost every older gate we touch, and it’s included in the installation quote, not billed as an add-on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Whitney, NV
Here’s what Whitney homeowners should expect to pay. A basic manual driveway swing gate replacement runs $1,800 to $3,400. Adding an automatic operator brings the total to $3,200 to $6,100. A full sliding gate conversion, which requires track or cantilever hardware, runs $3,800 to $8,000 depending on gate height and whether we’re cutting back existing landscaping or concrete. Pedestrian gates run $850 to $2,400 installed. The single biggest cost variable in Whitney is post work: if we’re replacing posts set in failed caliche footings, you should budget $400 to $900 per post for excavation, reinforcement, and concrete. We quote every one of these line items in writing before any work starts, so you know the full number up front. Call (725) 777-5391 for a free, no-pressure estimate.
We Also Serve Cities Near Whitney
Our crews serve Whitney and the surrounding Las Vegas Valley, including Gate Installation customers in Las Vegas, Paradise, Summerlin South, and Anthem. If you’re just outside Whitney, call us anyway. We regularly route technicians through the area and can often schedule you on a day when we’re already working nearby. Learn more about our Gate Installation in Whitney coverage.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Whitney
Yes, in most cases. We install photo eyes, safety edges, audible alarms, and current-sensing auto-reverse on existing operators as long as the operator itself still works. If your Whitney gate has an original 1980s or 1990s operator without any of these features, a retrofit runs $400 to $900 in most situations. If the control board is also failing, a new operator often costs about the same as a retrofit plus a board replacement, and we’ll tell you honestly which is the smarter spend. Call (725) 777-5391 for a written quote.
Usually the post needs to come out, but the gate panel can often be saved. Caliche soil in Whitney expands and softens with moisture, which slowly pushes shallow footings out of alignment. Re-anchoring an already-leaning post without resetting it to plumb only works if the footing itself is still sound, which is rare. We set new posts in 36-inch concrete footings with rebar and transfer your existing gate panel back on. Expect to pay $400 to $900 per post for the full reset. Call for a site inspection and we’ll tell you exactly what you’re looking at.
We install solar-powered operators for Whitney driveways that were never wired for gate automation. A solar panel, battery box, and operator typically run $1,800 to $3,500 installed, and we make sure the panel is sized for the shorter winter charging window. If you’d rather have hardwired power, we can trench conduit from the house to the gate, but that typically adds $1,200 to $3,000 depending on the distance and whether we’re cutting through concrete or caliche. Call (725) 777-5391 and we’ll walk you through both options with real numbers.
For most Whitney homes, rebuilding the existing swing gate is cheaper unless the driveway slopes or the setback is too tight for the gate to swing properly. A swing gate rebuild with new posts and hardware runs $1,800 to $4,000. Converting to a slide gate usually runs $3,800 to $8,000 because you’re adding track or cantilever hardware, possibly removing landscaping, and reworking the driveway’s edge. Slide gates make sense when the driveway has a steep approach or when you want to recover the swing arc space. We’ll give you both prices in writing so you can compare against your actual property, not a guess.
Yes. We install vehicle loop detectors that sense when a car is waiting at the gate and trigger it to open automatically, which means you don’t have to use a remote or keypad every time you pull in. Loop detectors for a Whitney driveway typically add $500 to $1,100 to an operator installation. For a free quote and same-week scheduling, call (725) 777-5391.
One Whitney Gate That Shows What We’re Talking About
On a 1980s stucco home near Whitney Park, our crew replaced a rust-frozen LiftMaster swing gate operator that had been installed before modern safety photocell requirements. The original hinge post had rotted at the soil line because caliche moisture cycles had held water against the steel for years. We set a new 4×4 steel post in a 36-inch concrete footing, transferred the existing decorative steel panel, and added a Ghost Controls solar gate opener with keypad entry, which meant no trenching across the driveway. The homeowner kept the look of the original gate and got an operator that actually opens it.
Call Portcullis Gate Repair Las Vegas for Gate Installation in Whitney
If your Whitney gate is leaning, sagging, or dead, call (725) 777-5391. We answer around the clock, we show up when we say we will, and we put every price in writing before a single bolt is turned. That’s the Kingswell Guarantee, and it applies to every Whitney job we do.
Written by Dean Prescott, Owner at Portcullis Gate Repair Las Vegas, serving Whitney, NV.